Catalina Capri 26 1991 $15,250.00 USD


[1 of 20 Photos]
Previous Next
$15,250.00 USD
Condition
The sails were reconditioned (cleaned, repaired, etc.) in 2016. Seller says he has never had a bit of trouble with the engine. Rudder is in good condition. Two 12V deep cycle batteries - one new last year. Fuel gauge does not work - I have purchased a new sender unit and hope to get it installed before winter lay-up. Ritchie bulkhead mount compass, two years old. Seller says "The deck is solid - no soft spots. I have used copper ablative paint (annually) on the hull; no evidence of blisters." Seller says "Standing rigging is in good condition - no corrosion or meathooks. It has a spring-loaded Forespar boom vang." Seller also says "Running rigging is all in serviceable condition - jib sheets, main sheet and furling line are new; main halyard is a little worn but usable. Roller furler (CDI Pro-Furl) is in good condition and works well. I replaced the standard thrust bearing with a ball-bearing unit last year. All lines are lead aft to the cockpit through line-stoppers. All winches are self-tailing." -Sails include the main and a 135 jib. The sails were reconditioned (cleaned, repaired, etc.) in 2016. -The engine is a Universal M2-12 11 hp diesel. It has a little under 400 hours on it. I've never had a bit of trouble with it. -Rudder is in good condition. Tiller extension. Wing keel. -Electronic accessories include a Raymarine ST1000 Autohelm, VHF radio, and Sony AM-FM radio with CD player & 4 speakers. -Two 12V deep cycle batteries - one new last year. -Fuel gauge does not work - I have purchased a new sender unit and hope to get it installed before winter lay-up. -Ritchie bulkhead mount compass, two years old. -The deck is solid - no soft spots. I have used copper ablative paint (annually) on the hull; no evidence of blisters. -Standing rigging is in good condition - no corrosion or meathooks. It has a spring-loaded Forespar boom vang. -Running rigging is all in serviceable condition - jib sheets, main sheet and furling line are new; main halyard is a little worn but usable. Roller furler (CDI Pro-Furl) is in good condition and works well. I replaced the standard thrust bearing with a ball-bearing unit last year. All lines are lead aft to the cockpit through line-stoppers. All winches are self-tailing. -Ground tackle - two hot-dipped galvanized slip-ring fluke anchors, one a SeaChoice #15E (7.8 lb) with 100 ft of in. rode and the other a similar but smaller anchor with 30 ft rode. Both have approx. 6 ft of galvanized chain. -Galley has alcohol stove and icebox. -Plumbing includes a (fairly new) Jabsco head and pressurized hot and cold water. -125V shorepower system with panel, outlets, and 50 ft cable. -Other accessories include cockpit cushions, LifeSling, life jackets, boat hooks, tiller extension.
Dealers Logo
Alert me of new listings from this seller