Berwick Kirby 36 Sloop 1991 33 000,00 $ CAD *

[1 de 30 Photos]
Précédente Suivant
33 000,00 $ CAD *

Shawnawdithit is a semi-custom 36-foot aft cockpit racer-cruiser that is a classic sloop based on a Bruce Kirby One-Ton design. The professional hull construction is of cold-molded wood using the West Epoxy System. She has an external lead deep fin keel and lovely spade rudder. Her deck construction is of plywood over frame.

Sleeping accommodations are provided for four persons with a v-berth forward, a pilot berth outboard amidships to port and a quarterberth aft to port. She has a v-berth forward immediately aft of the deep chain locker followed by the head on starboard and full cupboard storage on port. In the main cabin, one finds a large L-shaped dinette with a pilot berth to starboard along with a bench settee and pilot berth to port. She has a roomy galley with stove and fridge to starboard and the nav station and quarterberth to port.

Her cockpit is deep and safe and her deck and line arrangements are marvelous with all lines leading aft. She is a very unique vessel with beautiful lines and an excellent fit and finish.


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Sails and Rigging
  • Keel Type: Fin
  • Rig: Sloop
  • Spar Material: Aluminum
  • Rigging: SS Wire
  • Mainsail: still serviceable but will require replacement in the near future
  • Traveler in Cockpit
  • Lazy Jacks
  • Headsail 1: 130% Genoa
  • Headsail 2: 115% Jib
  • Roller Furling: Profurl
  • Solent stay (5/16? Dyneema) rigged on the mast but not fully installed on deck
  • DRS
  • Back Stay Adjuster: Manual
  • Boom Vang: Block and Tackle
  • Topping Lift
  • Emergency Tiller
  • Snatch Blocks: 2
  • Winches Standard: 9
  • Winch Handles: 2
  • Wheel Steering

Canvas Info
  • Colour: Blue
  • Dodger
  • Mainsail Cover
  • Folding seatback chairs for the Cockpit

  • GPS: Handheld Garmin
  • Compass
  • Depth Sounder
  • Knot Meter
  • Sum Log
  • Radar: mounted on stern post
  • VHF with DSC

Safety Equipment
  • Boat Hook
  • Carbon Monoxide Detector
  • Fire Extinguishers: 2
  • Life Ring
  • Man Overboard Pole
  • Radar Reflector
  • Ship?s Bell

  • Refrigerator: 12v NovaKool
  • Stove: Force 10 stove with broiler

General Equipment
  • Anchor 1: 25 lb. Delta
  • Anchor 2: 35 lb. Kingston CQR
  • Anchor: Fortress
  • Anchor Chain: 60 ft. 5/16 chain and 100 feet rope
  • Anchor Rode: 150 foot spare anchor rode
  • Anchor Windlass: Simpson Lawrence Manual
  • Batteries: 2 x 6v deep cycle house batteries and 1 x 12v starter battery
  • Battery Charger
  • Battery Parallel Switch
  • Battery Switch Vapor Proof
  • Bilge Blower: 1
  • Bilge Pumps: 2 Manual
  • Bilge Pumps: 2 Electric
  • Balmar MC61�3 stage alternator regulator
  • Boarding Ladder
  • Bow Rail
  • Bow Roller
  • Clock and Barometer
  • Storage Cradle
  • Dinghy: 8 foot rowing dinghy
  • Four Dorade vents
  • Fenders: 5
  • Head: Manual
  • Heater: Built In Propane
  • PSS Dripless Shaft Seal
  • Screens on Hatches and Ports
  • Two overhead hatches
  • Shore Power Inlets: 1
  • Shore Power Amps: 30 amps
  • Shore Power Cord Length: 30 feet
  • Teak and Holly Cabin Sole

Hull Construction
  • Hull design by Bruce Kirby
  • Layout design by Mark Ellis Yachts
  • Bare hull built by Berwick Yachts with main bulkhead installed
  • Boat completed by owner with scantlings and construction details drawn from books such as The WEST Book on Boat Design, Skene, Elements of Yacht Design, John Guzzwell Wooden Yacht Construction
  • Cold molded (WEST) with 7 layers of 1/8? western red cedar planks, alternative orientation at 90 degrees, overall thickness is 1?
  • Covered with fiberglass cloth
  • Three ring-frames (from gunnel to gunnel) with 12 full and partial bulkheads all epoxied to the hull with fillets
  • 2 stringers are 1 1/2? thick x 18? high at the maximum point and are running the fill length of hull 2 feet off centreline constructed of 2 x3/4? layers of Douglas Fir plywood, scarfed lengthwise
  • All fasteners either bronze or stainless
  • Deck is 1/2? marine Scarfed plywood
  • Coach house is 1? sides, roof 3/4? marine plywood.
Dealers Logo
Alertez-moi des nouvelles annonces de ce vendeur
* Des taxes et autres frais peuvent s'appliquer. Veuillez contacter le vendeur pour confirmer les détails complets.