C&C 115 2007 180 000,00 $ CAD *


[1 de 14 Photos]
Précédente Suivant
180 000,00 $ CAD *
Specs
Keel: Bulb
Hull Shape: Monohull

Dimensions
LOA: 38 ft 0 in
Beam: 11 ft 11 in
LWL: 33 ft 0 in
Maximum Draft: 6 ft 8 in
Displacement: 12300 lbs Half Load
Ballast: 4200 lbs
Headroom: 6 ft 4 in
Dry Weight: 11800 lbs

Engines
Total Power: 28 HP

Engine 1:
Engine/Fuel Type: Diesel
Drive Type: Sail drive
Engine Power: 28 HP


Tanks
Fresh Water Tanks: (70 Gallons)
Fuel Tanks: (26 Gallons)

Accommodations
Number of single berths: 6
Number of heads: 1


C&C Design Specs

With her epoxy resin, eglass, and CoreCell core post-cured hull laminate, vinylester resin infusion deck, and a carbon-fiber mast as standard equipment, the 115 maintains highoctane performance ratios yet an interior that features two separate cabins, luxurious main cabin, sit-down nav station, large galley, and head with stall shower. The C&C 115's long waterline (33 feet) produces a very impressive 147 displacement/length ratio. Her epoxy hull laminate consists of an all uni-directional e-glass structural laminate locally reinforced with uni-directional carbon fiber and sandwiched on CoreCell linear urethane foam coring. The laminate is carefully impregnated in metered equipment, consolidated along with all reinforcements and the coring, and placed under vacuum to allow ambient temperature cure. After this,the laminate is post-cured in a computer-controlled oven to maximize the physical properties of the composite. Building the laminate this way produces the lightest, strongest, and stiffest structure possible and the weight saved can be used for interior appointments and additional ballast further enhancing the 115's performance and livability. The bulbed 4,200-lb lead keel has an extremely low center of gravity producing a high righting moment allowing a powerful sailplan resulting in a sail area/displacement ratio of 23.1.



Interior

The 115 interior belies her raceboat capabilities. Using lightweight composite laminates, cabinetry is abundant and attractively finished in varnished cherry with laminated, curved trim. Bulkheads are attached to the interior components using Plexus methylmethacrylate adhesives providing additional stiffness to the hull structure without adding weight. Accommodations for six are provided in fore and aft double cabins and bunk-length main cabin settees. The forward facing nav station is designed to accommodate full navigational instrumentation. The galley is fit with a two burner gimbaled LPG stove/oven, large icebox, deep sink, and ample storage for provisions. A stall shower and large head are located aft and to port. By concentrating on weightsaving construction technologies the 115 delivers an interior befitting a comfy cruiser without giving up her dedication to top racecourse performance.



Deck and Cockpit

The infusion deck's laminate is structured from unidirectional e-glass, Baltek AL 600 coring, and a custom-blended vinylester resin. Using resin infusion with these materials results in a lighter, stiffer, and stronger deck than those produced with the antiquated, low-tech polyester resin laminating techniques favored by most other builders. C&C's distinctive deck design is continued on the 115. Wide side decks with molded-in non-skid provide safe and secure maneuvering in a seaway. The signature portlights and classic C&C styling makes the 115 a head-turner in any harbor. The cockpit puts comfort and function first. The helmsman is pampered with a wrap-around helmseat with the 60" wheel within fingertip reach for upwind sailing. The main trimmer is given a convenient position just forward of the helmsman and has the mechanical advantage necessary in the Harken gross/fine tune mainsheet system to tweak the best performance possible. The cockpit seats are over 6 feet long and have high seat backs for comfort. C&C's custom toerail and stanchion design maximizes on deck space and offers a necessary toehold when moving forward in challenging conditions. With the racer/cruiser in mind the deck for the 115 is designed for maximum performance while offering comfort for after the race or when cruising.



Electronics and Navigation

B&G Chart Plotter, Carbon Wind Transducer, Mast repeaters, Companionway Readouts,

Ritchie Compass



Sails and Rigging

Evolution Dacron set - barely used. 

new   3Di set   2019. 

Old set of 3Di 's. used for cruising or delivery  

Original spinnaker  Multi purpose all weather  

Norlite spinnaker. Light and beautiful. 

Kevlar jib  cut down to about 100%   

Low Stretch Halyards

Carbon Spinnaker Pole

Hydraulic Backstay

Solid Vang



Mast / Rig

The mast on the 115 has been co-engineered by C&C Yachts and SP, the world leader in composite engineering and materials technology, to produce an optimal section for the boat. Built by Novis Composites utilizing pre-preg, carbon-fiber laminates, cured under pressure (100 psi) at 250 degrees F, the 115's mast is less than half the weight of a comparable aluminum mast yet is stiffer and stronger. The weight saved aloft adds to the 115's stability advantage and reduces pitching moment maximizing her performance. A carbon-fiber mast, once an expensive option or custom raceboat feature, is standard equipment on the C&C 115, further testament to C&C's dedication to advanced yacht construction.

The boat's fractional rig features a 110% One-Design genoa, sheeted to Harken adjustable housetop tracks set at 8.5 degrees for tight upwind sheeting angles. Offwind performance is optimized with a One-Design 15' 11" spinnaker pole allowing for an oversized symmetrical spinnaker. For daysailing or cruising, there are plenty of options for sailing with an asymmetrical spinnaker whether in a snuffer or not.



Sail Area


I : 52.17 ft
J : 14.50 ft
P : 49.33 ft
E : 16.33 ft
Working Sail Area : 781.00 sq ft



Galley

Two Burner Gimballed Propane Stove with Oven,  Top Loading Refrigeration,

Granicote Solid Surface Counter Top



Propulsion System

Volvo MD130 Saildrive, Three Cylinder,  28/30 HP,



Mechanical and Accessories

Head with Shower, Transom Shower, Hot and Cold Pressure Water

Swim Ladder

60" Wheel



Safety gear

Double Lifelines with Gate



Electrical

30 Amp Shorepower

Two 12Volt House Batteries, One Engine Start Battery

LED Bow Lights



Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Dealers Logo
Alertez-moi des nouvelles annonces de ce vendeur
* Des taxes et autres frais peuvent s'appliquer. Veuillez contacter le vendeur pour confirmer les détails complets.